Call Toll Free: 1-877-553-2610

Steelway Cellar Doors

Get a Free Quote!

click below on your selection to go to the appropriate guide
ANGLED DOOR    FLAT DOOR    OTHER STYLES

angledirections.jpg (10022 bytes)
Use the following illustration as a guide to assist you while you take the required measurements listed below.                                                                             
(You may want to print this page and use it on the jobsite)
Angled Door Measurement

** For a price quote, complete the form and click submit. **
Inside Width of Foundation Outside Width of Foundation
A1 A2 B1 B2

A1, A2, B1 & B2 are important measurements that allows us to build a door that will sit on the center of your foundation.

Length of Foundation Height of Doorway
C1 (Inside Length) C2 (Outside Length) D
C1, C2 will allow us to make the door the proper length. D assures that the door is tall enough.
     
 

Name:
  Zip Code: *
  Email Address:
  Comments:
     
  We will email a quote to you, but if you prefer a fax copy please check here and enter your fax number.
     
  Please Fax My Quote Request  
  Fax Number:
     
   
    * Needed for calculating shipping/freight charges
     

flatdirection.jpg (9804 bytes)

Use the following illustration as a guide to assist you while you take the required measurements listed below.                                                                             
(You may want to print this page and use it on the jobsite)

Flat Door Measurement

** For a price quote, complete the form and click submit. **
Inside Width of Foundation Outside Width of Foundation
A1 A2 B1 B2

A1, A2 are important to allow the proper hinge clearance between the foundation walls.
B1 & B2 are important to ensure the door is made to the proper width.

Length of Foundation Height of Doorway
C1 D
C1 is important to ensure the door is the proper length. (Note: measure on top of the slope not along the ground) D is important to ensure the lintel is bent to the proper angle.
     
 

Name:
  Zip Code: *
  Email Address:
  Comments:
     
  We will email a quote to you, but if you prefer a fax copy please check here and enter your fax number.
     
  Please Fax My Quote Request  
  Fax Number:
     
   
    * Needed for calculating shipping/freight charges
     

Directions Corner Doors

Use the following illustration as a guide to assist you while you take the required measurements listed below.                                                                            
(You may want to print this page and use it on the jobsite)

These doors can be built either way... "right legged" or "left legged". The side of the new door that will be metal determines its name. (A "left legged" door is shown in the drawing)

Corner Door Measurement

Do You Need Your New Door Left Or Right Legged?

** For a price quote, complete the form and click submit. **
Inside Width of Foundation Outside Width of Foundation
A1 A2 B1 B2

A1, A2, B1 & B2 are to be measured from the house wall to the opposite foundation. They ensure the door is the proper width.

Length of Foundation Height of Doorway
C1 C2 D
C1, C2 ensure the door is the proper length. D ensures the door is built high enough.
If you are standing at the top of the steps looking down, is the house on your Right or your Left?
     
 

Name:
  Zip Code: *
  Email Address:
  Comments:
     
  We will email a quote to you, but if you prefer a fax copy please check here and enter your fax number.
     
  Please Fax My Quote Request  
  Fax Number:
     
   
    * Needed for calculating shipping/freight charges